installation, assistance and disposal.
as quickly as possible.
product or re-loading the gas, must be compliant with the regulations regarding
2.6.7 - Connection of the condensate drain line
Connect a drain pipe, of appropriate length, to the indoor unit condensate drain pipe, and block it with a strap.
Make it run inside the duct parallel to the system pipes, fastening it to the same using straps.
of the pipes and narrow the drain pipe.
If the drain pipe is fed into a sewage system, it is necessary to bend the pipe in
odours into the environment.
prevent counter-pressures such to compromise the operation, and the pipe itself
must never reach the level of the liquid deposited.
Check the correct run-off of the condensate liquid through the relative pipe by very
EN - 24