Disposal Of The Packaging; Setup; Setup Location Requirements - CASO DESIGN SV1000 Manual De Instrucciones

12.4 Disposal of the packaging

Caso believes in the importance of recycling and has selected packaging
materials that not only protect your unit from damage during transit, but
can be recycled to minimize any ecological impact.
Recycling the packaging materials preserves raw materials and reduces
waste. Take any packaging materials that are no longer required to a
recycling collection point for proper disposal.
► If possible, keep the original packaging for the duration of the guarantee
period in the event a return is necessary.

12.5 Setup

12.5.1

Setup location requirements:

In order to ensure the safe and trouble-free operation of the device, the
setup location must fulfill the following prerequisites:
•
The device must be set up on a firm, flat, level and heat-resistant
surface. The carrying capacity of the support must be appropriate to
withstand the weight of the device including water filling and the
heaviest expected food loading.
•
Do not set up the unit in a hot or damp environment or near flammable
material.
•
Do not move the SV1000 when it is in operation.
•
The electrical outlet must be easily accessible so that the plug can be
quickly disconnected in the case of an emergency.
•
The setup of this unit in non-stationary locations (e.g., boats,
airplanes, motor homes) must be carried out by a qualified electrician,
provided they guarantee the prerequisites for the safe use of the unit.
PLEASE NOTE