Operation And Maintenance; Technical Parameters - GRAPHITE 58G121 Instrucciones De Uso

QUICK RELEASE CHUCK REPLACEMENT
Quick-release chuck is screwed onto spindle of the drill driver and additionally secured with a screw.
Set the direction selector switch (3) in the middle position.
Open jaws of quick release chuck (1) and unscrew the fixing screw (left-hand thread) (fig. H).
nstall hexagonal key in the quick release chuck and tap the other end of the key.
Unscrew the quick release chuck.
nstallation of the quick release chuck is similar to deinstallation, only the sequence of actions is reversed.
All faults should be repaired by service workshop authorized by the manufacturer.
RATED PARAMETERS
Parameter
Voltage
Type of battery cells
Battery capacity
No load rotational speed
Drill chuck range
Torque control range
Maximum torque
Protection class
Weight
Year of production
Parameter
nput voltage
Frequency
Output voltage
Charging current
Battery charging time
Protection class
Weight
Year of production
NOISE LEVEL AND VIBRATION PARAMETERS
Sound pressure: Lp = 67 dB(A) K = 3 dB(A)
A
Sound power: Lw = 78 dB(A) K = 3 dB(A)
A
Vibration acceleration: a

OPERATION AND MAINTENANCE

TECHNICAL PARAMETERS

= 1,94 m/s 2 K=1,5 m/s 2
h
18
Drill
0-350/ 0-1000 min
1 - 23 plus drilling
Charger
Value
18 V DC
Ni-Cd
1500 mAh
-1
0,8 - 10 mm
20 Nm
1,84 kg
2016
Value
230 V AC
50 z
18 V DC
400 mA
~ 5 h
0,35 kg
2016