Trolley; Preparing For Electrode Welding (Mma) - Stel TIG μP 203H-353H AC/DC Manual De Instrucciones

TECHNICAL TIG µP 203H-353H AC/DC
DESCRIPTION

4.7 TROLLEY

A special trolley (Cod. 608190000L) has been designed
for the series TIG µP 203-353H AC/DC; it is able to hold
a machine of the TIG series and a cooling group (A.W.C.).
4.8 PREPARING FOR ELECTRODE WELDING (MMA) FIG.(6)
1) Follow the indications given above for primary connection and installation.
2) Connect the earth cable to the negative pole of the generator (ref.10 page 9).
3) Connect the electrode gun to the positive pole of the generator (ref.12 page 9).
4) Using the mode selection button (ref.4 page 9) choose electrode function.
5) Insert the bare core of the electrode in the gun.
6) Proceed as indicated in the chapter on arc welding (page 23)
56
ENGLISH
COD. 6902500070
STEL s.r.l. – Via del Progresso n° 59 – 36020
Loc. Castegnero (VICENZA) - ITALY
TEL. +39 444 639525 (central.) – +39 444 639682 (comm.)
FAX +39 444 639641 – E-mail:stelgroup.com
http: www.stelgroup.it
TECHNICAL TIG µP 203H-353H AC/DC
DESCRIPTION
4.7 TROLLEY
A special trolley (Cod. 608190000L) has been designed
for the series TIG µP 203-353H AC/DC; it is able to hold
a machine of the TIG series and a cooling group (A.W.C.).
4.8 PREPARING FOR ELECTRODE WELDING (MMA) FIG.(6)
1) Follow the indications given above for primary connection and installation.
2) Connect the earth cable to the negative pole of the generator (ref.10 page 9).
3) Connect the electrode gun to the positive pole of the generator (ref.12 page 9).
4) Using the mode selection button (ref.4 page 9) choose electrode function.
5) Insert the bare core of the electrode in the gun.
6) Proceed as indicated in the chapter on arc welding (page 23)
56
ENGLISH
COD. 6902500070
STEL s.r.l. – Via del Progresso n° 59 – 36020
Loc. Castegnero (VICENZA) - ITALY
TEL. +39 444 639525 (central.) – +39 444 639682 (comm.)
FAX +39 444 639641 – E-mail:stelgroup.com
http: www.stelgroup.it