Stel TIG μP 203H-353H AC/DC Manual De Instrucciones página 61

ENGLISH
TIG µP 203H-353H AC/DC
COD. 6902500070
1) butt joint
2) T joint
The angle of
electrode varies
passes made: the
electrode is
swinging it and
sides of the seam so as to avoid the accumulation of weld material in the centre of
the weld.
- Removing slag:
For coated electrodes, it is necessary to remove the slag after each pass. The slag
is removed with a small hammer or, in the case of brittle slag, with a wire brush.
To make the different types of joint correctly in the various positions, it is
necessary to practice under the guidance of an expert.
STEL s.r.l. – Via del Progresso n° 59 – 36020
Loc. Castegnero (VICENZA) - ITALY
TEL. +39 444 639525 (central.) – +39 444 639682 (comm.)
FAX +39 444 639641 – E-mail:stelgroup.com
http: www.stelgroup.it
TECHNICAL
DESCRIPTION
inclination of the
according to the
movement of the
performed by
stopping at the
61
ENGLISH
TIG µP 203H-353H AC/DC
COD. 6902500070
1) butt joint
2) T joint
The angle of
electrode varies
passes made: the
electrode is
swinging it and
sides of the seam so as to avoid the accumulation of weld material in the centre of
the weld.
- Removing slag:
For coated electrodes, it is necessary to remove the slag after each pass. The slag
is removed with a small hammer or, in the case of brittle slag, with a wire brush.
To make the different types of joint correctly in the various positions, it is
necessary to practice under the guidance of an expert.
STEL s.r.l. – Via del Progresso n° 59 – 36020
Loc. Castegnero (VICENZA) - ITALY
TEL. +39 444 639525 (central.) – +39 444 639682 (comm.)
FAX +39 444 639641 – E-mail:stelgroup.com
http: www.stelgroup.it
TECHNICAL
DESCRIPTION
inclination of the
according to the
movement of the
performed by
stopping at the
61