Specification - Techne Hybrigene Manual Del Usuario

H y b r i g e n e O P E R A T O R ' S M A N U A L

Specification

Maximum Number of Hybridisation Tubes
Temperature Range #
(NOTE: minimum temperature must be greater than 10°C above ambient)
Rotation of Hybridisation Tubes
4 steps, 5 positions and off
Adjustable rocking platform
Temperature stability in chamber
Stability in the tubes
Temperature uniformity in the chamber *
Temperature uniformity in the tubes *
Temperature set point resolution
Absolute accuracy
Heater Power 230V and 115V
Temperature selection
Temperature Display
Temperature Sensor
External Dimensions
Width
Depth
Height
Weight
Net
The Hybridiser includes a preset re-settable overtemperature cutout.
* Temperature measured in the centre of each tube.
# Large tubes are fitted with 70°C seals, seals part number 6101488 are required to
work to 100°C.
For the Hybridisation Tubes see the list under Accessories
Working conditions
The Hybrigene is designed to work safely under the following conditions:
Ambient temperature range
Humidity
Note: The control specifications are quoted at an ambient temperature of 20°C. The
specification may deteriorate outside an ambient temperature range of 18°C to 30°C.
Radio frequency interference tested and passed to EN50081-1.
Immunity Tested and passed to EN50082-1
10
100V
5°C to 40°C
Up to 95% relative humidity, non-condensing
4 (large and small)
16 mini tubes
ambient +10° to 80°C
5 rpm to 20rpm and off
Approx steps of 4 rpm
5-20 or 15-60 opm
better than 1.0°C
better than +0.1°C
better than +1.5°C
better than +1.0°C
0.1°C
better than +0.3°C
750 W
525 W
Digital
LED
PRT
355mm
383mm
432mm
15 Kg