The Hybrigene - Techne Hybrigene Manual Del Usuario

The Hybrigene

1 Insert the tubes or tube holder into the Hybrigene ensuring that they rotate freely
and engage on the drive rollers.
2 Close the door.
3 Connect the mains electricity supply to the mains socket at the rear of the unit.
Switch the power ON. The Controller display on the front panel will light
4 Press and hold the top left hand button (the bottom one is inoperative) on the
controller and, at the same time, press one of the right hand buttons. The up arrow
button will increase the set temperature and the down arrow button will decrease
the set temperature.
5 The Heater Indicator will be lit while the heater is on.
H y b r i g e n e O P E R A T O R ' S M A N U A L
19