Fixing Procedures - Techne Hybrigene Manual Del Usuario

H y b r i g e n e O P E R A T O R ' S M A N U A L
Fixing Procedure
Two Hybrigenes
• Switch the units off and remove the power to them.
• Put two units one on the other.
• The Stacking Plate has three holes and three slots. It has three slots to allow for the
adjustment of the feet to get the hybridisers level.
• Use three of the screws to attach the plate to the bottom of the top hybridiser.
• Use the other three screws to attach the plate to the bottom hybridiser.
• Ensure that the screws are tight.
Three Hybrigenes
• If you have three units repeat the process for the top two units. We recommend that you
fix the top Hybrigene to the wall for safety.
Wall Fixing
• Use the three screws to attach a support bracket to the top of the top unit.
• Ensure that the screws are tight.
• Put the hybridisers in the position you want to use them.
• Position the wall bracket and mark the position of the holes.
• You should use the appropriate wall fixings for the type of wall you are securing the units
against.
• Use the self-tapping screws or the appropriate screws to attach the wall bracket.
• Whatever fixture you use, ensure that the screws are tight.
• Re-position the hybridisers.
• Use the thumb-screw to attach the support bracket to the wall bracket.
14