How To Connect The Open-Collector Inputs Of The Controller - Agilent Technologies TV 1001 SEM Manual De Instrucciones

How to Connect the Open-Collector Inputs of the Controller

Here below there are the typical connections of the open collector input of TV
1001 SEM to an exter-nal system. Two cases are considered:
1. the customer supplies the 24 Vdc
2. the customer does not supply the 24 Vdc
Please note that on the connector a 24 Vdc, 60 mA voltage, a GROUND signal
and the open collector pin are available.
Figure 22
TV 1001 SEM User Manual / 87-900-973-01 (H)

How to Connect the Open-Collector Inputs of the Controller

Case 1
Technical Information
257/296
17