Sirius SILT26 Instrucciones De Uso Y De Montaje página 25

ENTRETIEN
An accurate maintenance guarantees good
functioning and long-lasting performance. *
Particular care is due to the grease filter The
grease filter is fixed through magnets, there-
fore it is sufficient to insert a hand tool or the
tip of a knife in the dedicated opening and
push upwards in order to pull the filter out of
its place. See Fig. 12.
In order to remove the filter from the hood,
unhook the two security cables opening their
snap-hooks. The active coal filter has to be
removed after the extraction of the grease
filter by pushing its special plastic handle.
The grease filter can be cleaned by hand-
washing or in dishwashers..
The active coal filter has to be replaced in re-
lation to its use, at least once every six mon-
ths. To clean the appliance itself tepid wa-
ter and neutral detergent are recommended,
while abrasive products should be avoided.
The power cord must be replaced only by
qualified person.
The LED lamps must be replaced only by qua-
lified person.
25