Setting Temperature Unit; Setting The Date And Time; Setting Power State; Setting Factory Reset - OHAUS STARTER 400D Manual De Instrucciones

EN 8
-
3.3

Setting Temperature Unit

Ohaus optical DO probe STDO21 include a built-in temperature probe, the meter will be in
Automatic Temperature Compensation (ATC) mode automatically. You can select the temperature
unit according to your preferred: °C or °F.
Note: °C = 5/9 (°F -32)
The default setting is 25 °C (77°F).
3.4

Setting the Date and Time

The Date format is yy-mm-dd. Press button-
numerical digit. Press button-
3.5

Setting Power State

We have 2 power states: "Auto OFF" or "Always ON".
When "Auto OFF" is selected, which means the meter will turn off the powder without any press
operation after 10 minutes and auto-off icon
"Always ON" means power will not turn off automatically, and the power always-on icon
displays.
Ohaus suggest you to select "Auto OFF" so to save power of batteries.
3.6

Setting Factory Reset

Press button-
Find Quality Products Online at:
to confirm current value then goes to next numerical digit.
and button- together to enter the Reset Factory Setting screen.
GlobalTestSupply
www.
STARTER 400D Portable DO Meter
or button- to adjust the value of each
will display at the top-left of the battery status icon.
.com
sales@GlobalTestSupply.com