Display And Controls - OHAUS STARTER 400D Manual De Instrucciones

STARTER 400D Portable DO Meter
1.3

Display and controls

1
13
12
11
Display
31 Time: HH:MM:SS
2 Date: YYYY-MM-DD
3
calibration data: |K-1| 0.3 and |B|<0.1
Probe condition is very good
4 Measurement icon - measurement (calibration) is running
5 Calibration icon - calibration is running
6
Power state icon, include power always on icon
off; and auto-off icon
4.4); power state icon position is at the top-left of the battery status icon.
7 Battery status icon – the charged status of the battery
8 DO reading: mg/L and %
9 Temperature during measurement or in calibration process
10 Barometric pressure during measurement or in calibration process
11 Data log: memory number
12 ppt for salinity entry
Find Quality Products Online at:
2 3
5
4
which means after 10 minutes no operation meter will turn off(see
GlobalTestSupply
www.
6
7
8
9
10
calibration data: 0.3 |K-1| 0.4 and |B| <0.1
Probe condition is acceptable.
, means meter will not automatically turn
.com
EN 3
-
sales@GlobalTestSupply.com