Before Installation; Installation Procedure - Toto CT705UNG Manual De Instrucciones

If necessary, remove the existing toilet, clean the installation area, and
remove the used wax ring.
Distance between finished wall and the center of the floor drain, "RI",
must be 10" (254mm) to 12" (305mm).
ill. 1
1. Install the closet flange according
to the manufacturer's instructions.
2. Clean any debris out of the
closet flange and then install new
mounting bolts (not supplied) into
the slots of the closet flange
(see Ill. 2). The head of the bolt
should be inserted into the slot with
its threads facing upward.
3. Carefully turn the toilet upside
down onto some padding. Firmly
press a new bowl gasket (not
supplied) onto the circular recess
around the toilet bowl's horn
(see Ill. 3).
4. Turn the toilet upright and gently
lower into position over the closet
flange. With toilet properly aligned,
press firmly on both sides of toilet
rim to set the bowl wax ring.

BEFORE INSTALLATION

RI

INSTALLATION PROCEDURE

Closet Flange
ill. 2
ill. 3
CAUTION: Do not move
the bowl after the bowl
wax ring is set. If the seal
is broken, you will need to
install a new wax seal.
3
C/L
C/L
Gasket