CASUALPLAY protector FIX Instrucciones De Uso página 20

Adjusting the PROTECTOR FIX recline (see illustrations 22 - 23)
• The back of the PROTECTOR FIX has a reclining adjustment to suit the
requirements of the moment. If the child falls asleep or wants to adopt a more
relaxed position, increase the recline of the PROTECTOR FIX seat.
• Turn the selector knob towards the right (fig. 22) and move the seat towards the
desired position (fig. 23).
Removing the PROTECTOR FIX from the car (see illustration 24)
• Release the seat belt buckle in the vehicle, loosen it and remove it from the
runner.
• Remove the child from the PROTECTOR FIX seat.
• Release the connectors on both sides (a red signal will appear) (fig 24).
• Detach the safety seat from the car seat.
Dismantling the PROTECTOR FIX (see illustrations 25 - 26)
• To dismantle the PROTECTOR FIX seat, press the button located on the lower
part of the back section (fig. 25) and pull the back section away from the seat
section (fig. 26).
PROTECTOR FIX connectors folding mechanism (see illustrations 27 - 28)
• While pressing the ridged part of the red button, lift it up slightly to release the
mechanism and maintaining the pressure (fig. 27), turn either of the 2 connectors
downwards.
• Release the button and continue turning (fig. 28). When the connectors reach
the maximum folding position (180 º), the mechanism will click indicating that it is
locked again.
• To unfold the connectors, repeat the process until it clicks again indicating that it
is locked into place.
Removing and replacing the upholstery (see illustrations 29 - 30)
• Take the backrest off the base.
• For the upholstery on the backrest, unfasten the zips, undo the fastening straps
and the plastic strips (fig. 29).
• For the upholstery on the base, undo the fastening straps underneath the base
(fig. 30).
• Follow the same steps in reverse order to put the upholstery back on again.
18