ABB ACQ580-04 Guía De Instalación Rápida página 60

60 Technical data
Dimensions, weights and free space requirements
Frame size Height
mm
IP00/IP20, UL Type Open/UL Type 1 (option +B051)
R10 1462
R11 1662
20 mm (0.79 in) free space is required around the drive module from the enclosure back panel and front door.
Ambient conditions
Installation site
For TN and TT neutral grounded network systems and IT non corner-grounded network systems: 0 to
altitude 4000 m (13123 ft) above sea level. For TN, TT and IT corner grounded network systems: 0 to 2000 m
(6561 ft) above sea level. The output current must be derated at altitudes above 1000 m (3281 ft). The
derating is 1% for each 100 m (328 ft) above 1000 m (3281 ft).
Surrounding
Operation: -15...+55 °C (5 ...131 °F). Frost is not permitted. The rated output current must be derated by
air temperature 1% for each 1 °C (1.8 °F) over 40 °C (104 °F). Storage (in the package): -40 to +70 °C (-40 to +158 °F).
Markings
The applicable markings are shown on the type designation label of the drive.
CE UL
Declarations of conformity
EU Declaration of Conformity
Machinery Directive 2006/42/EC
We
Manufacturer:
Address:
Phone:
declare under our sole responsibility that the following product:
Frequency converters
ACQ580-04/-34
with regard to the safety function
Safe Torque Off
is in conformity with all the relevant safety component requirements of EU Machinery Directive 2006/42/EC, when the listed safety function
is used for safety component functionality.
The following harmonized standards have been applied:
EN 61800-5-2:2007
EN 62061:2005
+ AC:2010 + A1:2013 + A2:2015
EN ISO 13849-1:2015
EN ISO 13849-2:2012
EN 60204-1:2018
The following other standards have been applied:
IEC 61508:2010, parts 1-2
IEC 61800-5-2:2016
The product(s) referred in this Declaration of conformity fulfil(s) the relevant provisions of other European Union Directives which are
notified in Single EU Declaration of conformity 3AXD10000497692.
Authorized to compile the technical file: ABB Oy, Hiomotie 13, 00380 Helsinki, Finland.
Helsinki, May 7, 2021
Signed for and on behalf of:
Tuomo Tarula
Local Division Manager, ABB Oy
Document number 3AXD10000611400
Width
in mm
57.55 350
65.43 350
EAC RCM China ROHS
xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx xxxxxxxxxxxxxxxxxxxxxxxxxxx
ABB Oy
Hiomotie 13, 00380 Helsinki, Finland.
+358 10 22 11
Adjustable speed electrical power drive systems – Part 5-2: Safety
requirements - Functional
Safety of machinery – Functional safety of safety-related electrical, electronic
and programmable electronic control systems
Safety of machinery – Safety-related parts of control systems. Part 1: General
requirements
Safety of machinery – Safety-related parts of the control systems. Part 2:
Validation
Safety of machinery – Electrical equipment of machines – Part 1: General
requirements
Functional safety of electrical / electronic / programmable electronic safety-
related systems
Adjustable speed electrical power drive systems – Part 5-2: Safety
requirements - Functional
Harri Mustonen
Product Unit Manager, ABB Oy
Page 1 of 1
Depth
in mm
13.78 529
13.78 529
KC UKCA
Declaration of Conformity
Supply of Machinery (Safety) Regulations 2008
We
Manufacturer:
Address:
Phone:
declare under our sole responsibility that the following product:
Frequency converters
ACQ580-04/-34
with regard to the safety function
Safe Torque Off
is in conformity with all the relevant safety component requirements of the Supply of Machinery (Safety) Regulations 2008, when the listed safety
function is used for safety component functionality.
The following designated standards have been applied:
EN 61800-5-2:2007
EN 62061:2005
+ AC:2010 + A1:2013 + A2:2015
EN ISO 13849-1:2015
EN ISO 13849-2:2012
EN 60204-1:2018
The following other standards have been applied:
IEC 61508:2010, parts 1-2
IEC 61800-5-2:2016
The product(s) referred in this declaration of conformity fulfil(s) the relevant provisions of other UK statutory requirements, which are notified in
a single declaration of conformity 3AXD10001326271.
Authorized to compile the technical file: ABB Limited, Daresbury Park, Cheshire, United Kingdom, WA4 4BT.
Helsinki, May 7, 2021
Signed for and on behalf of:
Tuomo Tarula
Local Division Manager, ABB Oy
Document number 3AXD10001329526
Weight
in kg
20.81 161 355
20.81 199 439
TUV Nord WEEE
xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx xxxxxxxxxxxxxxxxxxxxxxxxxxx
ABB Oy
Hiomotie 13, 00380 Helsinki, Finland.
+358 10 22 11
Adjustable speed electrical power drive systems – Part 5-2: Safety requirements -
Functional
Safety of machinery – Functional safety of safety-related electrical, electronic and
programmable electronic control systems
Safety of machinery – Safety-related parts of control systems. Part 1: General
requirements
Safety of machinery – Safety-related parts of the control systems. Part 2:
Validation
Safety of machinery – Electrical equipment of machines – Part 1: General
requirements
Functional safety of electrical / electronic / programmable electronic safety-
related systems
Adjustable speed electrical power drive systems – Part 5-2: Safety requirements -
Functional
Harri Mustonen
Product Unit Manager, ABB Oy
Page 1 of 1
lb