Noise And Vibration - Flex PE 14-2 150 Manual Del Usuario

 Hold the electric power tool firmly and
position your body and arms to allow you
to absorb kickback forces. If fitted, always
use the auxiliary handle to ensure the best
possible control over the recoil forces
or reaction torques when acceleration
occurs. The operator can control kickback
and reaction forces by taking appropriate
precautions.
 Keep your hands away from the rotating
insertion tool. The insertion tool may
kickback over your hand.
 Keep your body out of the area into which
the electric power tool moves when
a recoil occurs. Kickback propels
the electric power tool in the direction
opposite to the movement of the polisher
at the point of pinching.
 Work especially carefully near corners,
sharp edges, etc. Prevent the insertion
tool from recoiling off the workpiece and
jamming. The rotating insertion tool has
a tendency to snag on corners, sharp
edges or if it bounces. This causes a loss
of control or kickback.
 Do not use a chain or toothed saw blade.
Such insertion tools frequently cause
a kickback or the loss of control of the
electric power tool.
Additional safety instructions
 The mains voltage and the voltage
specifications on the rating plate must
correspond.
 Do not press the spindle lock until the tool
stops.
16
All manuals and user guides at all-guides.com

Noise and vibration

The noise and vibration values have been
determined in accordance with EN 60745.
The A evaluated noise level of the power tool
is typically:
– Sound pressure level L
– Sound power level L
– Uncertainty:
Total vibration value (when polishing painted
surfaces):
– Emission value a
– Uncertainty:
qÜÉ=áåÇáÅ~íÉÇ=ãÉ~ëìêÉãÉåíë=êÉÑÉê=íç=åÉï=
éçïÉê=íççäëK=a~áäó=ìëÉ=Å~ìëÉë=íÜÉ=åçáëÉ=~åÇ=
îáÄê~íáçå=î~äìÉë=íç=ÅÜ~åÖÉK
The vibration emission level given in this infor-
mation sheet has been measured in accordance
with a standardised test given in EN 60745 and
may be used to compare one tool with another.
It may be used for a preliminary assessment
of exposure. The declared vibration emission
level represents the main applications of the tool.
However if the tool is used for different applica-
tions, with different accessories or poorly
maintained, the vibration emission may differ.
This may significantly increase the exposure level
over the total working period.
For a precise estimation of the vibration load
the times should also be considered during which
the power tool is switched off or even running, but
not actually in use. This may significantly decrease
the exposure level over the total working period.
Identify additional safety measures to protect
the operator from the effects of vibration such as:
maintain the tool and the accessories, keep
the hands warm, organisation of work patterns.
tÉ~ê=É~ê=éêçíÉÅíáçå=~í=~=ëçìåÇ=éêÉëëìêÉ=
~ÄçîÉ=UR=Ç_E^FK
PE 14-2 150, PE 14-1 180
:
pA
:
WA
:
h
`^rqflk>
klqb
`^rqflk>
80 dB(A);
91 dB(A);
K = 3 dB.
2
<2.5 m/s
2
K = 1.5 m/s