Domo DO-262A Manual De Instrucciones página 61

sales surface of the manufacturer or by a qualified person.
1. Air filter
- Clean the air filter at least ever 2 weeks. To make sure the
airco can operate in optimal conditions.
- This appliance has 2 filters. Remove both filters by follow
the arrows on the back of the unit.
- Clean the air filters in lukewarm water with a bit of deter-
gent. Rinse the filters thoroughly and let them dry.
- Make sure the filters are completely dry before placing the
back in to the airco.
NOTE : the grill and filter are attached to one another, but can be taken apart.
2. Airco body
Use a damp, soft cloth and a bit of mild detergent, to clean the outside of the
unit. Make sure the unit is thoroughly dried afterwards.
3. Storing
Before storing the unit for a longer periode of time, please follow the next
steps :
- Drain all the water from the appliance.
- Afterwards turn on the unit in the "fan" mode for half a day. Make sure the
unit is placed in a heated room. This will dry the unit completely and previent
the forming of mold.
- Turn off the unit, remove the plug from the socket and remove the batteries
from the remote control.
- Clean the filters and place them back in the unit.
- Store the unit in a dry, dark place.
POSSIBLE PROBLEMS AND THEIR SOLUTIONS
- The appliance isn't working when pressing the on/off touch.
o
o
- The room is not cool enough.
o
o
o
o
The error code P1 is dispayed , drain the water from the airco.
The room temperature is lower than the selected temperature. Adjust
the selected temperature.
The windows and doors aren't closed. Make sure all windows and
doors are closed.
There are heat sources in the room. Remove all heat sources if pos-
sible.
The air outlet hose is not connected or blocked. Attache the hose and
check if there is no blockage.
The selected temperature is to high. Adjust the selected temperature.
61
DO-262A