Modelling Light (Mod. Light); Zoom Mode (Zoom Mode); Extended Zoom Mode - Metz mecablitz 64 AF-1 digital Manual De Instrucciones

11.3 Modelling light (MOD. LIGHT)

The modelling light is a high-frequency
stroboscopic flash. It creates the impression
of a semi-permanent light for a duration of
about 3 seconds. The modelling light
enables the user to assess light distribution
and the formation of shadows before taking
pictures.
The modelling light is triggered with the
manual firing button
Setting procedure
OPTION
• Press the
O
OPTION
• Press the
RAPID
SUB-REFL.
• Press the
p
q
k
• Press the
O
OPTION
STANDBY
• Press the
MOD. LIGHT
BEEP
p
q
After activation of the modelling light, „
" appears in the INFO menu.
MOD. LIGHT O
OFF
ON
198
.
D
button as often as it takes
for the selection menu to appear.
OPTION
sensor button on the
touch display.
sensor button on the
MOD. LIGHT
touch display and select
MOD. LIGHT
sensor button on the
touch display.
ON OFF
or sensor button on
the touch display and switch the modelling
light on or off. The setting is adopted
immediately.
.
OPTION
O
OPTION
ZOOMM SIZE
ZOOM MODE
STANDBY
p
q
ZOOMMODE O
Extended
Standard
Spot

11.4 Zoom Mode (ZOOM MODE)

11.4.1 Extended Zoom Mode

In extended zoom mode the zoom position
of the reflector is reduced to one level below
the focal length of the camera lens.
The resulting expanded and broader light
coverage provides additional dispersed light
(reflections) inside rooms so that a softer
flash illumination is possible.
Example:
The focal length of the camera lens is 50 mm.
The extended zoom mode sets a 35 mm
reflector position on the flash unit. However,
50 mm continues to be shown on the display.
Setting procedure
D
• Press the button as often as it takes
for the selection menu to appear.
OPTION
• Press the sensor button on the
touch display.
• Press the sensor buttons on the
ZOOM MODE
touch display and select
ZOOM MODE
• Press the button as often as it
takes for the selection menu to appear.
EXTENDED
• Press the sensor button on the
touch display.
The setting is adopted immediately.
After activation of extended zoom mode,
"EXT" appears in the INFO menu.
.