Publicidad
Step 6
Separate the EXTENSION SLIDES (K) from the EXTENSION RAILS (J) as shown
å
in the upper diagram below. Be prepared, the parts are greasy.
Fasten the EXTENSION SLIDES (K) to the LIFT TOP ENDS (G and H). Use ten
å
SILVER 5/8" FLAT HEAD SCREWS (23S).
Fasten the CABLE BRACKET (72G) to the LIFT TOP (I). Use two BLACK 9/16"
å
LARGE HEAD SCREWS (1S).
K
Pull down the release lever and pull the SLIDE from the RAIL.
SILVER 5/8" FLAT HEAD SCREW
(10 used for the EXTENSION SLIDES)
Open end
K
www.sauder.com/services
23S
H
J
I
72G
BLACK 9/16" LARGE HEAD SCREW
422624
Open end
G
K
1S
(2 used in this step)
Page 11
Publicidad
