Publicidad
Step 16
Follow the numbered sequence.
å
1. Push the ROD (26A) into the RACK
å
TENSIONER (121M) on the RIGHT END (A)
as shown.
2. Push the ROD (26A) into the RACK
å
TENSIONER (121M) on the left.
3. Continue holding the assembly intact.
å
Fasten the RACK TENSIONER (121M) to
the LEFT END (B). Use four BLACK 9/16"
LARGE HEAD SCREWS (1S).
4. Push the WHEELS (123M) back into
å
position inside the RACK TENSIONERS on
each END (A and B). See the large diagram
below for the fi nal position of the ROD,
WHEELS, and RACK TENSIONER on the
LEFT END (B).
121M
4.
123M
B
BLACK 9/16" LARGE HEAD SCREW
(4 used in this step)
www.sauder.com/services
3.
26A
1S
121M
2.
B
B
422624
26A
121M
1.
A
Page 21
Publicidad
