Safety Instructions; Symbols And Icons - Parkside PBHA 12 A1 Traducción Del Manual De Instrucciones Original

for steel ............................. max. 8 mm
Sound power level
(L ) ................... 86,5 dB(A), K
pA
Sound power level
(L
) .................. 97,5 dB(A); K
WA
Vibration max (a ) ... 8,6 m/s
h
Temperature...........................max. 50 °C
Charging process ...................4 - 40 °C
Operation .......................... -20 - 50 °C
Storage .................................0 - 45 °C
Noise and vibration values have been de-
termined according to the standards and
regulations mentioned in the declaration of
conformity.
The stated vibration emission value was
measured in accordance with a standard
testing procedure and may be used to
compare one power tool to another.
The stated vibration emission value may
also be used for a preliminary exposure
assessment.
Warning: The vibration emission
value may differ during actual use of
the power tool from the stated value
depending on the manner in which
the power tool is used.
Try to keep the exposure to vibrations
as low as possible. An example of how
to reduce vibration exposure is limiting
the working hours. For this purpose all
parts of the operating cycle have to be
considered (for example, times when
the electric tool is switched off and
times when it is switched on but run-
ning without any load).
Attention! An up-to-date list
of battery compatibility can
be found at:
www.lidl.de/akku
This device can only be operated with the
following rechargeable batteries:
PAPK 12 A1, PAPK 12 A2, PAPK 12 A3,
= 3 dB
pA
PAPK 12 B1, PAPK 12 B2, PAPK 12 B3,.
This type of battery may only be charged
= 3 dB
WA
2 ; K= 1,5 m/s 2 with the following chargers:
PLGK 12 A1, PLGK 12 A2, PLGK 12 B2.

Safety instructions

Ensure that the safety instructions are ob-
served when operating the appliance.

Symbols and icons

Symbols on the appliance:
PAPK 12 A1
Charging
PAPK 12 A2
time (h.)
PAPK 12 A3
PLGK 12 A1
PLGK 12 A2
PLGK 12 B2
Carefully read these operating in-
structions.
Wear personal protective equip-
ment. Wear eye protection!
Wear hearing protection!
Wear a dust protection mask!
Drilling/screwing
Impact drilling
This device is part of the
Parkside X 12 V TEAM series
GB
PAPK 12 B1
PAPK 12 B2
PAPK 12 B3
1 2
1 2
0,5 1
IE
21