Dremel 4000 Instrucciones De Funcionamiento Y Seguridad página 17

DM 2610016589 05-12_DM 2610016589 05-12.qxp 6/26/12 2:12 PM Page 17
Sanding Accessories
Sanding discs in fine, medium and coarse
grades are made to fit mandrel No. 402. They
can be used for nearly any small sanding job
you might have, from model making to fine
furniture finishing. In addition, there is the drum
sander, a tiny drum which fits into the Rotary
Tool and makes it possible to shape wood,
smooth fiberglass, sand inside curves and
other difficult places, and other sanding jobs.
You replace the sanding bands on the drum as
they become worn and lose their grit. Bands
come in fine medium and coarse grades.
Flapwheels grind and polish flat or contoured
surfaces. They are used most effectively as a
finishing sander after heavier surface sanding
and material removal is completed. Flapwheels
come in fine and coarse grades. Buffs are a
great finishing accessory for cleaning and light
sanding. They work effectively on metal, glass,
wood, aluminum and plastics. Coarse and
medium buffs are sold together. Fine buffs are
sold individually. Do not exceed 15,000 RPM in
speed. 1/8" shank.
Grinding Wheel
Use for deburring, removing rust, and general
purpose grinding. Use with Mandrel #402.
Cutting Wheels
These thin discs of emery or fiberglass are
Dremel Accessories (Cont.)
used for slicing, cutting off and similar
operations. Use them for cutting off frozen bolt
heads and nuts, or to reslot a screw head
which has become so damaged that the
screwdriver won't work in it. Fine for cutting
BX cable, small rods, tubing, cable and cutting
rectangular holes in sheet metal.
Gives you fast, clean cuts in drywall.
Cuts ceramic wall tile, cement board, and
plaster.
Cuts through all types of wood and wood
composites.
For routing, inlaying, and mortising in wood
and other soft materials. Use with Dremel No.
335 Router attachment and No. 231
Shaper/Router table.
17
Drywall Cutting Bit
Tile Cutting Bit
Spiral Cutting Bit
High Speed Router Bits