Tabla de contenido

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 53
1 Screw
2 Flat fold filter
3 Spring pin
4 Handle for filter cleaning
Pull out the spring plug.
Pull out the filter cleaner.
Fault
Appliance cannot be started
Engine is running erratically
Engine is running but machine is
not moving
Engine is running but machine is
only moving slowly
Insufficient vacuum performance
20
English
All manuals and user guides at all-guides.com
Turn out the 4 screws and remove the
holder.
Remove both the flatfold filters and re-
place them with new flat fold filters.
Replace holder and tighten the screws.
Replace the filter cleaner handle.
Plug in the spring plug.

Faults

Remedy
Refuel
Open fuel cock
Check fuel system, connections and joints
Check fuse of electrical starter; replace if required.
Charging battery
Check and clean spark plug, replace if necessary.
Inform Kärcher Customer Service.
Clean or replace air filter
Check fuel system, connections and joints
Inform Kärcher Customer Service.
Check setting of freewheel lever
Inform Kärcher Customer Service.
Allow machine to warm up for approx. 3 minutes in sub-zero temperatures
Inform Kärcher Customer Service.
Check washers at the suction head
Open the exhaust openings of suction operations (only for Leaf Blower attachment set)
Clean the hole-plate or fine dust filter (in Fine dust filter attachment set) in the suction head

Publicidad

Tabla de contenido
loading

Tabla de contenido