STEINEL L 845 SC Manual Del Usuario página 59

The light source used in this light cannot be replaced. If
the light source needs to be replaced (e.g. at the end of its
service life), the complete light must be replaced.
5. Installation
Hazard from electrical power.
Touching live parts can result in electrical shock,
burns or death.
• Switch OFF power and interrupt power supply.
• Using a voltage tester, check to make sure that the
power supply is disconnected.
• Make sure power supply remains interrupted.
Risk of damage to property!
Mixing up connection leads may produce a short circuit.
• Identify connection leads.
• Connect the leads correctly.
– 14 –
Index