STEINEL L 845 SC Manual Del Usuario página 78

Basic light level function
Basic light level provides lighting at 10% of light output.
The light only switches to maximum output (100%) in
response to movement in the detection zone (see Time
setting). The light
then switches to the activated night light level.
Basic light is ON when the level of light falls below the
brightness threshold. Basic light is always ON when day-
light mode is activated.
0 min = soft light start / no night ON from twilight
setting selected
10 min = soft light start + basic light level, 10 minutes
30 min = soft light start + basic light level, 30 minutes
= Soft light start + basic light level all night long
What is soft light start?
The sensor-switched light features a soft light start
function. This means that when turned ON, the light is
not switched directly to maximum output but constantly
builds up brightness to 100% within a short period of
time. Brightness is also gradually reduced when the light is
switched OFF.
– 33 –
GB
Index