Inserting The Battery - Hilti PS 200 S Manual Del Usuario

All manuals and user guides at all-guides.com
4.3 Technical data for PSA 55 infrared adapter
Battery
Dimensions
Weight
Data interface between the scanner
and tablet
Adapter - computer data interface
5 Operation

5.1 Inserting the battery

Note
The temperature inside a motor vehicle exposed to the heat of the sun can easily exceed the maximum
permissible storage temperature for the PS 250 Ferroscan system. Some of the components of the
PS 250 Ferroscan system may suffer damage if exposed to temperatures exceeding 60°C.
▶ Insert the battery.
5.2 Main menu
The system always starts in the main menu. All scanning functions and set-up options are selected here. The
battery state of charge is displayed at the top of the screen together with the memory status. The various
scan modes and settings menus are displayed as symbols on the left side of the screen. Use the arrow
buttons to toggle between these options. The Confirm button selects the option.
5.2.1 Quickscan
The remaining memory for Quickscan recording is shown
at the top of the screen in meters or feet (depending on
the scanner type and units set).
Printed: 14.11.2016 | Doc-Nr: PUB / 5314765 / 000 / 00
1 x 1.5 V AAA
90 x 50 x 28 mm
65 g
Infrared
USB
English 31