Adjusting The Volume; Setting The Unit Of Measure - Hilti PS 200 S Manual Del Usuario

All manuals and user guides at all-guides.com
Backlight permanently off
Backlight is controlled automatically. With this option,
the backlight is switched off automatically after 5 minutes
if no button is pressed during this time and is reactivated
the next time a button is pressed.

5.4 Adjusting the volume

Sets the volume level of the audible signal during scan-
ning. Use the arrow buttons to toggle between options,
Press the Confirm button to select the desired option and
press the Cancel button to return to the settings menu.

5.5 Setting the unit of measure

On certain models, the unit of measure used for scanning can be set to an alternative system. Use the arrow
buttons to toggle between options, Press the Confirm button to select the desired option and press the
Cancel button to return to the settings menu.
metric (mm or m, as appropriate)
imperial (feet, where applicable)
Printed: 14.11.2016 | Doc-Nr: PUB / 5314765 / 000 / 00
English 33