General Settings - Psm - JVC KD-S100 Manual De Instrucciones

To adjust bass and treble—Bass/Tre
1
Select "Bass" or "Treble."
2
Adjust the bass or treble.
To adjust subwoofer output—
S.woofer
1
Adjust the output level.
2
Select a cut-off frequency according to the
connected subwoofer.
3
Adjust the continuity of the sound among speakers
(slope).
To adjust the input level of each
source—Vol Adj
This setting is required for each source except for FM.
Once an adjustment is made, it will be memorized.
When you change the source, the volume level will
automatically increase or decrease according to the
adjusted level.
1
Select a source before entering the SEL menu.
2
Adjust to match the input level to the FM sound
level.
General settings — PSM
You can change PSM (Preferred Setting Mode) items
(except "Sirius ID") listed in the table that follows.
1
Enter the PSM menu (see page 4).
2
Select a PSM item.
3
Select or adjust the selected PSM item.
4
Repeat steps 2 and 3 to adjust the other
PSM items if necessary.
5
Finish the procedure.
Continued on the next page
15