Storing User Channels In Memory; Listening To A User Preset Channel; Selecting A Category/Channel On The List - JVC KD-S100 Manual De Instrucciones

Checking the XM Satellite radio ID
While selecting "XM1," "XM2," or "XM3," select
"Channel 0."
The display alternately shows "RADIO ID" and the
8-digit (alphanumeric) ID number.
To cancel the ID number display, select any channel
other than "Channel 0."

Storing user channels in memory

You can preset six channels for each band.
Ex.: Storing a SIRIUS channel into preset number 4 of
the SR1 band.
1
2
• Holding the button displays the User Preset
Channel List (see step 6 on the right column).
3
Enter the MODE menu (see page 4).
4
Select "Preset."
5
22
6
Select a user preset number.
• You can move to the lists of the other SIRIUS bands by
turning the control dial.
7
Store the channel.

Listening to a user preset channel

1
2
• Holding this button displays the User Preset
Channel List (see step
3
Perform steps 3 to 6 (on the left column)
to select a user preset channel.
4
Finish the procedure.
Selecting a category/channel on the
list
Selecting a category from the list
1
Enter the MODE menu (see page 4).
2
Select "Category."
above).
6