JVC KD-S100 Manual De Instrucciones página 33

Symptoms
• The iPod or D. player does not turn on or
does not work.
• Buttons do not work as intended.
• The sound is distorted.
• "Disconnect" appears on the display.
• Playback stops.
• No sound can be heard when connecting an
iPod nano.
• No sound can be heard.
• "ERROR 01" appears on the display when
connecting a D. player.
• "No Files" or "No Track" appears on the
display.
• "Reset 1" – "Reset 7" appears on the display. Disconnect the adapter from both the unit and iPod/
• "Reset 8" appears on the display.
• The iPod's or D. player's controls do not work
after disconnecting from this unit.
• Microsoft and Windows Media are either registered trademarks or trademarks of Microsoft Corporation in the United
States and/or other countries.
• SD logo is a trademark.
• iPod is a trademark of Apple Computer, Inc., registered in the U.S. and other countries.
Remedies/Causes
• Check the connecting cable and its connection.
• Update the firmware version.
• Charge the battery.
The functions of the buttons have been changed. Press
POWER/ATT/ENTER before performing the operation.
Deactivate the equalizer either on the unit or the iPod/
D. player.
Check the connecting cable and its connection.
The headphones are disconnected during playback. Restart
the playback operation using the control panel (see page
24).
Disconnect the headphones from the iPod nano.
Disconnect the adapter from the D. player. Then, connect
it again.
No tracks are stored. Import tracks to the iPod or D. player.
D. player. Then, connect it again.
Check the connection between the adapter and this unit.
Reset the iPod or D. player.
33