Playing From A Usb Memory - JVC KD-S100 Manual De Instrucciones

Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

The control panel goes back to
the previous position.
Playback starts automatically if tracks are
recorded.

Playing from a USB memory

This unit can play MP3/WMA tracks stored in a USB
memory.
All tracks in the USB memory will be played repeatedly
until you change the source.
• Removing the USB memory will also stop playback.
~
Ÿ
To detach the USB memory, straightly pull it out
from the unit.
Cautions:
• Avoid using the SD card/USB memory when it
might hinder your safety driving.
• Make sure all important data have been backed
up to avoid losing the data.
USB input terminal
USB memory
If an SD card or USB memory has been attached...
Playback starts from where it has been stopped
previously.
• If a different SD card or USB memory is currently
attached, playback starts from the beginning.
About MP3 and WMA tracks
MP3 and WMA "tracks" (words "file" and "track" are
used interchangeably) are recorded in "folders."
About the CD changer
It is recommended to use a JVC MP3-compatible CD
changer with your unit.
• You can also connect MP3-incompatible CD changers.
However, these units are not compatible with MP3
discs.
• You cannot use the CH-X99, CH-X100, and KD-MK
series CD changers with this unit.
• You cannot play any WMA disc in the CD changer.
• Disc text information recorded in the CD Text can be
displayed when a JVC CD Text compatible CD changer
is connected.
To fast-forward or reverse the track
To go to the next or previous tracks
11

Publicidad

Tabla de contenido
loading

Tabla de contenido