Loading Printing Paper - Canon PIXMA MX700 Guía De Inicio Rápida

Loading Printing Paper

You can load A4, Letter, or B5-sized plain paper in the Front Tray. You cannot load any other paper in
the Front Tray. For information on loading paper in the Rear Tray, refer to the User's Guide on-
screen manual.
Important
To print out received faxes, the machine uses the Front Tray by default, regardless of the source
selected by the Feed Switch. The paper source used to print out faxes can be specified in the FAX
paper source setting in the Operation Panel.
If you cut plain paper to 4" x 6" / 101.6 x 152.4 mm, 5" x 7" / 127.0 x 177.8 mm, or 2.13" x 3.39" / 54.0 x
86.0 mm (credit card-size) for a trial print, it can cause paper jams.
Always load paper in portrait orientation. Loading paper in landscape orientation can cause the paper
to be jammed.
1
Open the Paper Output Tray (A).
2
Extend the Output Tray Extension (B).
3
Press the Feed Switch (C) so that the
Front Tray lamp (D) lights.
4
Load the paper in the Front Tray with the
print side facing DOWN, aligning the paper
stack against the right edge of the Front
Tray.
Do not load higher than the Load Limit Mark (A).
5
Align the near and the left edges of the
paper with the Paper Size Mark (B).
6
Slide the Paper Guide (C) against the left
side of the loaded paper stack.
10 Loading Printing Paper
(C)
(D)
(B)
(A)
(C)
(B)
(A)