Replacing An Ink Tank - Canon PIXMA MX700 Guía De Inicio Rápida

Replacing an Ink Tank

When ink tanks run out of ink, replace them using the following steps.
1
Open the Paper Output Tray.
2
Make sure that the machine is turned on, lift
the Scanning Unit (Printer Cover) with both
hands, and set the Scanning Unit Support to
hold the cover.
3
Push the tab of the ink tank whose lamp is
flashing fast (A) and remove it.
Do not touch the Print Head Lock Lever (B).
4
Prepare the replacement tank.
(1) Remove the new ink tank from its packaging.
(2) Pull the orange tape (C) in the direction of the
arrow to peel off the protective film.
(3) Remove the film (D) completely.
Important
Make sure that the protective film does not remain
on the air hole (E). If the air hole is blocked with
the remaining film, ink may leak out or may not
eject properly.
38 Replacing an Ink Tank
(B)
(D)
(A)
(C)
(E)