Operation Panel - Canon PIXMA MX700 Guía De Inicio Rápida

Operation Panel

(1) (2) (3) (4) (5)
(25)
(1) ON/OFF button / Power lamp
Turns the machine on and off. Lights or flashes green to indicate the power status. Before
turning on the machine, make sure the Document Cover is closed.
(2) COPY button
Switches the machine to copy mode.
(3) FAX button
Switches the machine to fax mode.
(4) SCAN button
Switches the machine to scan mode. In scan mode, the machine scans a document to
your computer according to the settings selected. To use this button, the machine must
be connected to a computer. For details, refer to the Scanning Guide on-screen manual.
(5) MEMORY CARD button
Switches the machine to memory card mode.
(6) In Use/Memory lamp
Flashes when the telephone line is in use. Lights when there are documents stored in the
machine's memory.
(7) Enlarge/Reduce button
Sets the enlargement or reduction ratio for copying.
(8) Alarm lamp
Lights or flashes orange when an error, such as paper-out or ink-out, occurs.
(9) LCD (Liquid Crystal Display)
Displays messages, menu selections, and the operational status.
(10) { } [ ] buttons
Scrolls through menu selections and increases/decreases setting values, such as the
number of copies. You can use these buttons when {, }, [, and ] are displayed on
the LCD. Also, the [ button cancels the entered character, and the ] button enters a
space between characters when entering characters.
(11) OK button
Finalizes your selection for the menu or setting item.
Dismisses the error message and resumes the machine's normal operation after
resolving a printing error or removing jammed paper.
Ejects documents remaining in the ADF.
(12) Menu button
Accesses the menus and settings to customize operation of your machine.
(13) Numeric buttons
Enter numerical values such as the number of copies, as well as fax/telephone numbers
and characters.
(6) (7)(8)
(24) (23) (22)
(9) (10) (11) (12) (13)
(21) (20) (19)
Operation Panel
(14) (15) (16)
(18) (17)
11