Removing The Memory Card - Canon PIXMA MX700 Guía De Inicio Rápida

Removing the Memory Card

1
Open the Card Slot Cover.
2
Make sure that the Access lamp is lit, then remove the memory card.
Do not remove the memory card while the Access lamp is flashing.
Hold the part of the memory card that is sticking out to remove it from the machine.
Important
The Access lamp flashes while the machine is reading or writing data from/to the memory card.
Removing the memory card or turning off the machine while the Access lamp is flashing may
damage the data saved on the memory card. Do not remove the memory card while the Access
lamp is flashing.
3
Close the Card Slot Cover.
Printing the Photo Displayed on the LCD (Display
Photo)
1
Prepare for printing.
(1) Turn on the machine.
(2) Load paper.
2
Insert the memory card.
(1) Press the MEMORY CARD button.
(2) Insert the memory card into the Card Slot.
See "Inserting the Memory Card" on page 15.
3
Press the [ or ] button to select Display photo, then press the OK button.
4
Select the photo to print.
(1) Press the [ or ] button to display the photo to print.
(2) Press the Color button.
(3) Press the { or } button or the Numeric buttons to specify the number of copies to print.
5
Adjust the print settings as necessary.
For details, refer to "Setting Items" in "Printing from a Memory Card" in the User's Guide on-
screen manual.
6
Press the Color button to start printing.
16 Printing from a Memory Card