Disposal; Removing The Battery - Kärcher BD 38/12 C Bp Manual Del Usuario

Replace splash guard
1 Splash guard
2 Holding ring
 Pull the retaining ring with the splash
guard off the cleaning head towards the
top.
 Remove the worn splash guard from
the retaining ring and dispose of.
 Push new splash guard onto the knobs
of the retaining ring.
 Attach the retaining ring with the splash
guard to the cleaning head.
Maintenance contract
To ensure a reliable operation of the appli-
ance maintenance contracts can be con-
cluded with the competent Kärcher sales
office.
22

Removing the battery

DANGER
The removal of the battery may only be per-
formed by the Kärcher aftersales service or
a specialist.
The evaluation, whether the battery is dam-
aged or not, is done by an authorised after-
sales technician
The Chapter "Safety instructions" for han-
dling accumulators must be observed un-
conditionally.
1 Screw
2 Cover
 Unscrew 2 screws.
 Swivel the lid downwards.
 Loosen and remove the battery plug.
 Remove the battery.
 Dispose of used battery in accordance
with the applicable provisions.
EN – 8

Disposal