Accessories (Optional); Tips On Lawn Care - Cub Cadet 13B726HD603 Instrucciones De Funcionamiento Originales

EN
Release the parking brake: Fully depress clutch/
■
brake pedal, push lever to a speed setting.
Move the direction of travel lever to the corre-
■
sponding position.
Slowly release the clutch/brake pedal, the unit
■
moves off.
Stopping the mower
Depress the clutch/brake pedal until the unit stops.
■
Mowing
In normal mode
■
ignition lock): Before reversing the machine,
switch off and raise the cutter deck.
In reverse mowing mode
■
tion, ignition lock): Exercise extreme caution when
reverse mowing and do not activate unless
absolutely necessary.
Do not change direction when the mower is
■
coasting or driving.
Start the engine as indicated.
■
To ensure adequate power output, move the
■
throttle to .
Release the parking brake: Fully depress clutch/
■
brake pedal, push lever to a speed setting.
Move the direction-of-travel lever to "F"/ forwards.
■
Switch on the cutter deck:
■
- Switch on PTO .
Lower the cutter deck.
■
Slowly release the clutch/brake pedal, the unit
■
moves off.
Emptying the grass catcher
If grass cuttings are left lying on the ground or if
the fill level indicator (17, Fig. 1) indicates that the
basket is full:
Stop the mower.
■
Actuate the parking brake.
■
Switch off the cutting mechanism.
■
Fig. 10a
Pull grass catcher upwards using the rear handle
■
and empty.
or
Fig. 10b
Stop the engine and wait until all moving parts
■
have come to a standstill.
Remove the grass catcher.
■
Empty out the contents.
■
Re-attach the grass catcher.
■
General
When adjusting the cutting height and travel speed,
ensure that the mower is not overloaded.
To ensure problem-free mowing, the cutting height
and driving speed must be adjusted according to the
length, type and moisture of the clippings. If block-
ages occur, reduce the driving speed and increase
the cutting height.
14
/ (see Operation,
(see Opera-
Switching the device off
Stop the mower.
■
Step on the brake pedal and actuate the parking
■
brake.
Switch off and raise the cutter deck.
■
Move the throttle to the middle position.
■
After 20 seconds set ignition key to
■
Remove the ignition key.
■
Note
Leave engine to cool down before placing
the mower in an enclosed space.

Accessories (optional)

Risk of injury from the cutter
Wear safety gloves.
Fig. 6
Mowing with side discharge
Accessories: Deflector flap (c)
Set the cutting height adjustment lever to "1"
■
(cutter deck bottom).
Remove discharge duct (b).
■
Attach discharge flap (c).
■
Mulching
Accessories: Mulch locking part (d)
Set the cutting height adjustment lever to "1"
■
(cutter deck bottom).
Remove discharge chute (b).
■
Fit mulch locking part (d).
■
Note
Due to the safety interlock system, the
grass catcher (a) must also be attached
when mowing with side discharge or when
mulching.

Tips on lawn care

Here are some tips to help you keep your lawn look-
ing healthy and ensure uniform growth.
Mowing
A lawn is made up of various different types of
grass. If you mow more frequently, the grown of
strongly-rooting grasses is favoured resulting in
firm turf. If you only rarely mow the grass, you will
encourage the development of high-growing types of
grass and other weeds (e.g., clover and daisies).
The normal height of a lawn is approx. 4-5 cm.
Tips on lawn care
.