Product Description; Intended Use And Operation; Contraindications; Md 30 Technical Data - Nouvag MD 30 Instrucciones De Uso

1

Product description

1.1

Intended use and operation

The MD 30 in combination with a motor and corresponding handpiece or contra angle (separate medical device) is
used primarily in dental Implantology. The device can also be used for microsurgical applications as well as in oral
and maxillofacial surgical procedures. The device is designed for drilling, milling and sawing bone as well as for screw
insertion into bone. An integrated peristaltic pump is provided in order to cool the rotating instruments so that
damage to tissue can be prevented.
The MD 30 may only be operated by qualified and trained personnel.
It is used specifically in Implantology for:
• Milling and drilling the implant bed
• Cutting the thread for the implant
• Screwing in the implant
1.2

Contraindications

Not known.
1.3

MD 30 technical data

Voltage: -------------------------------------------------------------------------- variable: 100 V∼/ 115 V∼/ 230 V∼, 50–60 Hz
Fuse, power supply: ---------------------------------------------------------------------------------- 2 fuses T 3.15 AL 250 VAC
Power consumption: --------------------------------------------------------------------------------------------------------- 120 VA
Applied part: ------------------------------------------------------------------------------------------------------------------ Type B*
Protection class: ---------------------------------------------------------------------------------------------------------------Class I
Dimensions (W x D x H): ------------------------------------------------------------------------------------ 260 x 250 x 110 mm
Net weight control unit: ------------------------------------------------------------------------------------------------------ 3.7 kg
Motor:
Motor coupling: ------------------------------------------------------------------------------------------Intra coupling ISO3964
Motor speed: ---------------------------------------------------------------------------------------------------- 300 - 50,000 rpm
Max. Motor torque: -----------------------------------------------------------------------------------------------------------6 Ncm
Motor weight:---------------------------------------------------------------------------------------------------------------- 0.280 kg
Motor cable length --------------------------------------------------------------------------------------------------------------- 2 m
Pedal:
IP code (pedal)-------------------------------------------------------------------------------------------------------------------- IP68
*Applied part of Type B is the instrument used with the MD 30.
1.4

Ambient conditions

Relative humidity:
Temperature:
Atmospheric pressure:
1.5

Warranty coverage

Purchasing the MD 30 entitles you to a 1-year warranty. If you return the warranty card for registration within four
weeks of the date of purchase, warranty coverage will be extended for a further 6 months. Consumable parts are not
covered by the warranty. Improper use or repair, or failure to observe these instructions, relieve us from any
obligation arising from warranty provisions or other claims.
2
All manuals and user guides at all-guides.com
Transport and storage:
Max. 90%
0°C to 60°C
700 hPa to 1060 hPa
• Removing the fixture mount
• Placing the cover screw
Operation:
Max. 80%
10°C to 30°C
800 hPa to 1060 hPa
MD 30 Operating Instructions, Art. No. 31686, V45/12
MD 30