Sony VPL-VW100 Manual De Instrucciones página 43

4
Make the setting or adjustment of an item.
When changing the adjustment level
To increase the value, press M or ,.
To decrease the value, press m or <.
Press ENTER to restore the original screen.
When changing the setting
Press M or m to change the setting.
Press ENTER to restore the original screen.
You can restore the original screen using < depending on the selected
item.
To clear the menu
Press MENU.
To reset the items that have been adjusted
Select the item you want to reset, then press RESET.
"Complete! " appears on the screen and the setting is reset to its factory preset
value.
Items that can be reset are:
• "Contrast," "Brightness," "Color," "Hue," "Sharpness" and "Color Temp."
in "Adjust Picture," and "RCP" on the Picture
• "Dot Phase," "H Size," and "Shift" of "Adjust Signal," "V Position,"
"Title Area," and "DRC Palette" of "DRC Mode" on the Signal
• "V Keystone" on the Installation
Items that cannot be adjusted
Adjustable items are limited depending on the input signals. The items that
cannot be adjusted or set do not appear in the menu. (1 page 74)
Next menu window
Setting items
Adjust Picture
Picture
Contrast :
Brightness :
Signal
Color :
Hue :
Function
Sharpness :
NR :
Installation
Black Level Adj. :
Setup
Gamma Correction : Off
Color Temp :
Information
Advanced Iris :
Sel: Set:
menu
menu
Operation through the Menus
Cinema
80
50
50
50
50
Off
Off
Low
Auto
Back: Exit:
menu
43
GB