Making Fine Adjustments to the Horizontal
Picture Position
Note
For details on how to make fine adjustments of the horizontal picture position, consult
with qualified personnel. When the lens is scratched, there is a charge for repair.
Also, do not look into the lens while you are adjusting the picture position.
You can adjust the lens position right or left by about 1 mm from the center of
the lens.
1
Remove the ring (washer) attached around the lens by turning
it counterclockwise.
2
Loosen the four screws located at the position indicated with
an arrow by turning them counterclockwise with a Philips
screwdriver.
Making Fine Adjustments to the Horizontal Picture Position
83
GB