Connecting To A Computer - Sony VPL-VW100 Manual De Instrucciones

Connecting to a Computer

Right side of the projector
: Video signal flow
Tip
Set "Input-A Signal Sel." or "DVI Signal Sel." in the Setup
"Computer." If the input signal does not appear properly, set it to "Computer." (1 page
53)
Note
If you set your computer, such as a notebook type, to output the signal to both your
computer's display and an external monitor, the picture of the external monitor may not
appear properly. Set your computer to output the signal to only the external monitor.
For details, refer to the computer's operating instructions supplied with your computer.
to monitor output
HD D-sub 15-pin cable (not supplied),
or DVI - DVI cable (not supplied)
Step 2: Connecting the Projector
Computer
menu to "Auto" or
21
GB