On The Phone - Siemens Pure binax Guia Del Usuario

Setting the focus manually:
If you have several hearing programs, change to
u
hearing program 1.
Press the rocker switch that is set for this function.
u
The mid level is active by default.
Press the upper rocker switch to focus more to the
u
front, or the lower rocker switch to listen to the
broader environment.
This function is intended for unique and temporary
listening situations. The hearing instruments thus return
automatically to the automatic setting of program 1 if
the sound environment changes significantly or after
approximately 45 minutes. You can also exit the spatial
configurator mode.
Exiting spatial configurator mode:
Toggle to the minimum or maximum level.
u
An optional signal tone can indicate the minimum and
maximum level.
Toggle one step further.
u
The same signal tone as for changing the hearing
program is played, indicating that you have exited the
spatial configurator mode.
22 Special listening situations
All manuals and user guides at all-guides.com

On the phone

When you are on the phone, hold
the telephone receiver slightly above
your ear. The hearing instrument and
telephone receiver have to be aligned.
Turn the receiver slightly so that the ear
is not completely covered.
Telephone program
You may prefer a certain volume when using the phone.
Ask your Hearing Care Professional to configure a
telephone program.
Switch to the telephone program whenever you are on
u
the phone or use the automatic program switch.
If a telephone program or the automatic program
switch are configured for your hearing instrument, it is
listed in section "Settings".
Special listening situations 23