Wearing Connexxlink; Programming On The Table - Siemens ConnexxLink Manual Del Operador

Wearing ConnexxLink

The patient wears the hearing instruments while the
hearing instruments are programmed.
Use the neckloop to put
X
ConnexxLink around the patients
neck.
The patient should maintain a
X
forward facing head position, same
direction as ConnexxLink.

Programming on the table

If you want to pre-configure the hearing instruments you
can also have ConnexxLink and the
hearing instruments lying on the
table.
When programming on the table:
Place the hearing instruments
X
along the neckloop (refer to the
picture).
Keep a minimum distance of
X
3 cm (1.2 inches) between the
two hearing instruments.
Keep a distance of 5 to 10 cm (2 to 4 inches) between
X
each hearing instrument and ConnexxLink.
EN
ES
PT
EL
TR
(2 – 4'')
9