Do not use acetone, undilut-
ed acids and solvents, as
they corrode the materials
used on the appliance.
Keep packaging films away
from children, there is a risk of
suffocation!
WARNING
According to applicable regu-
lations, the appliance must
never be used on the drinking
water net without a system
separator. Ensure that the
connection of your building
water installation on which
the high-pressure cleaner is
operated is equipped with a
system separator pursuant to
EN 12729 Type BA.
Water that has flown through
a system separator is no
longer classified as drinking
water.
High-pressure hoses, fixtures
and couplings are important
for the safety of the appli-
ance. Only use high-pressure
hoses, fixtures and couplings
recommended by the manu-
facturer.
When disconnecting the sup-
ply or high pressure hose, hot
water may leak from the con-
nections after operation.
CAUTION
Mind the weight of the appli-
ance when selecting the stor-
age location and during trans-
port (see technical data) to
prevent accidents or injuries.
16
All manuals and user guides at all-guides.com
This appliance was designed
The improper use of deter-
Store detergents away from
Safety installations serve the
Lock trigger gun
Thermo-valve at the pump
– 6
EN
Working with detergent
WARNING
to be used with detergents
which are supplied or recom-
mended by the manufacturer.
The use of other detergents
or chemicals may compro-
mise the safety of the appli-
ance.
gents can cause severe inju-
ries or toxication.
the reach of children.
Safety Devices
CAUTION
protection of the user and
may not be modified or by-
passed.
This lock locks the lever of the
trigger gun and prevents the
inadvertent start of the appli-
ance.
The thermostat valve pre-
vents the pump from over-
heating.
The circulation heats up the
water. At 60 °C water temper-
ature, the thermostat valve
opens and lets out hot water.