Publicidad
Step 13
Step
Carefully turn your unit on its front. Add some support
å
under the Hutch.
Fasten three ANGLE BRACKETS (FF) to the LEFT END (B),
å
LARGE UPRIGHT (E), and BOTTOM (J). Use three BLACK
9/16" LARGE HEAD SCREWS (BBB).
NOTE: Be sure the edges of the ANGLE BRACKETS are
å
even with the edges of the LEFT END and UPRIGHT.
Fasten the BASE (V) to the LEFT END (B), LARGE
å
UPRIGHT (E), and BOTTOM (J). Use three BLACK 9/16"
LARGE HEAD SCREWS (BBB).
FF
Page 18
E
J
B
V
FF
FF
BLACK 9/16" LARGE HEAD SCREW
404961
BBB
(6 used in this step)
For support, place packing
foam and magazines here.
www.sauder.com/services
Publicidad
