Sauder 404961 Manual Del Usuario página 26

Step 21 Step
To insert the KEYBOARD SHELF (O2) into your unit, tip the front of the KEYBOARD SHELF down and drop the rollers on
å
the KEYBOARD SHELF behind the rollers on the unit. Lift the front of the KEYBOARD SHELF up and slide it into the unit.
Fasten the PULL (HH) to the KEYBOARD FRONT (P2). Use two SILVER 5/8" MACHINE SCREWS (ZZ).
å
To make adjustments to the KEYBOARD FRONT (P2), loosen the SCREWS in the KEYBOARD HINGES, make needed
å
adjustments, and tighten the SCREWS.
Slip a RUBBER SLEEVE (RR) over each of the METAL PINS (QQ). Insert the METAL PINS into the hole locations of your
å
choice in the LEFT END (B) and UPRIGHT (E). Set the ADJUSTABLE SHELF (N) onto the METAL PINS.
Push a CAM COVER (PP) onto each HIDDEN
å
CAM in the hutch.
Cover the head of the BLACK 1-7/8" FLAT
å
SCREWS (UU) in the UPRIGHT (E) and
SHELF (K3) with a SCREW COVER (TT).
(8 used)
To cover HIDDEN CAMS
SILVER 5/8" MACHINE SCREW
(2 used for the PULL)
Page 26
PP
ZZ
QQ
(4 used)
RR
K3
B
HH
N
P2
E
TT
To cover screws
404961
TT
O2
www.sauder.com/services