Publicidad
Step 1
Assemble your unit on a carpeted fl oor or on the empty carton
å
to avoid scratching your unit or the fl oor.
Push twenty-one HIDDEN CAMS (AA2) into the ENDS (A2
å
and B), HUTCH ENDS (C and D), LARGE UPRIGHT (E),
MODESTY PANEL (I), BOTTOM (J), and SHELF (K3). Then,
insert a CAM DOWEL (BB2) into each HIDDEN CAM except
the holes shown in the MODESTY PANEL (I) and BOTTOM (J).
Arrow
BB2
(16 used)
(21 used)
Do not insert CAM
DOWELS (AA2)
into these holes.
Page 6
AA2
C
D
I
Arrow
Hole
The arrow in the HIDDEN
CAM must point toward the
hole in the edge of the board.
Look for this icon. It means a
video assembly tip is available at
www.sauder.com/services/tips
Do not tighten the HIDDEN CAMS in this step.
E
B
K3
J
404961
A2
Arrow
Insert the metal end of the CAM
DOWEL into the HIDDEN CAM.
www.sauder.com/services
Publicidad
