Stryker Sidne Manual Del Usuario página 13

Sidne™ Feedback Messages
The following table shows Sidne™ feedback messages and their meanings.
Voice Message
Connected
Disconnected
Light Error
O.R. Lights...
Notes on operation on SIDNE-Visum Lights Interface
1. When any light is at maximum intensity, the "High" and the "Brighter"
commands are not available and they will be shown in gray to indicate
this condition.
2. When any light is at minimum intensity, the "Low" and the "Darker"
commands are not available and they will be shown in gray to indicate
this condition.
3. When any light is ON, the "Off " command is not available it will be
shown in gray to indicate this condition.
4. When any light is OFF, the "On" command is not available and it will be
shown in gray to indicate this condition.
All manuals and user guides at all-guides.com
Playback Condition
Visum O.R. Lights are turned on and plugged into Sidne
Visum O.R. Lights were plugged into Sidne and now have been disconnected or
turned off
An error has been reported on one or more of the connected Visum O.R.
Lights.
Servicing may be necessary.
Added as a prefix to the above messages, when feedback message is announced
while not in the O.R. Lights Voice Command menu. Also added as a prefix to
the "Connected" and "Disconnected" message.
9