Assembling The Cooking Grid; Assembling The Charcoal Pan; Assembling The Lid - Pit Boss PB410FP Montaje Y Operación

5.

ASSEMBLING THE COOKING GRID

Parts Required:
1 x Swing Handle (#1)
1 x Lift Handle (#3)
1 x Cooking Grid (#4)
4 x Screw (#C)
Installation:
• Mount the Swing Handle to the
side of the Cooking Grid using two
screws. Note illustration 5A.
• Mount the Lift Handle to the top of
the Cooking Grid using two screws.
Note illustration 5B.

6. ASSEMBLING THE CHARCOAL PAN

Parts Required:
2 x Charcoal Pan Handle (#6)
1 x Charcoal Pan (#7)
4 x Screw (#A)
4 x Nut (#B)
Installation:
• Place a Charcoal Pan Handle to one
inside edge of the Charcoal Pan and
using two screws and nuts. Repeat
same procedure for opposing side.
7.

ASSEMBLING THE LID

Parts Required:
1 x Lid Ring (#2)
1 x Lid (#5)
1 x Nut (#B)
Installation:
• Insert the Lid Ring into the top of
the Lid and secure using one nut.
8
5A
1
C
5B
6
6
B
A
7
3
C
6
B A
7