Installing The Ink Tanks - Canon PIXMA MP600R Manual De Instrucciones

Installing the Ink Tanks

Caution
Store ink tanks out of the reach of small children for their safety.
Do not drop or shake ink tanks as this may cause the ink to leak out and stain your clothes and hands.
Be sure to remove the clear film from the ink tank in the exact order as shown in step 1.
1
To prepare the cyan ink tank first, pull the
orange tape (A) in the direction of the arrow,
then remove the protective film (B)
completely.
Note
If the protective film remains on the air hole (C), it may
cause problems with printing.
2
Remove the orange protective cap (A) from
the bottom of the ink tank.
Discard the cap once it is removed.
Note
Do not touch the electrical contacts (B).
Do not squeeze the sides of ink tanks as this may
cause the ink to leak out and stain your clothes and
hands.
Do not touch the open ink tank port (C).
Do not reattach the protective cap once it has been
removed.
(B)
(A)
Preparing the Machine
(A)
(C)
(B)
(C)
(B)
15